Gas-liquid two-phase mass flowmeter

Location：

Application occasions

Suitable for three-phase metering of oil, gas, and water in low to medium production oil and gas wells.
Structural composition

Gas-liquid two-phase mass flowmeter, gas-liquid two-phase conical orifice flowmeter, cyclone separator, manual and electric on-off valves.
Working principle

During normal metering, the mixed fluid enters the mass flow meter through the bottom for flow measurement, and the direction of the inlet three-way valve is adjusted to enter the sampling calibration process. The mixed fluid enters the sampling tube for

Measurement range (example) ：
Gas phase: 0.5~5 × 10 Nm/d (designed according to user requirements)
Liquid phase: 0.5-300 m ³/ D
Moisture content: 0-100%
Measurement accuracy: (confidence level: 95%)
Gas phase: ± 3-5% MS
Liquid phase: ± 5-8% MS
Moisture content: 5-8% FS
medium temperature ：
5~230℃
ambient temperature ：
-40~85℃
Explosion proof level ：
Not less than Ex d Ⅱ B T4 Gb
protection grade ：
Not less than IP65
communication interface ：
RS485+RJ45, scalable wireless communication

● Solved the long-term problem of online calibration for multiphase flow measurement;

● Perform online calibration of the tested oil and gas wells at any time to save calibration costs and increase efficiency& Nbsp;

● Measuring devices that require special and expensive materials for corrosive media can greatly reduce costs& Nbsp;

● Online calibration of toxic gas media and high-pressure oil and gas wells can greatly reduce safety hazards& Nbsp;

● Adapt to a wide range of gas-liquid ratio (GVF 0-100%) and a wide range of flow metering& Nbsp;

● Reliable moisture content measurement.

Files Download

Consulting：+86-0991-3718850

Cooperative email ：qing.shi@netail.cn

Company Address ： No. 22, Shenyang Street, Yingbin Road, Xinshi District (High tech Zone), Ürümqi, Xinjiang