Location:

Home Products and Solutions flowmeter

Split tube mass flow meter

  • Application occasions

    Large caliber applications such as Transport hub, booster station and crude oil processing station.

  • Structural composition

    It consists of a mixer, a shunt tube, a mass flow meter, a composite pressure sensor, and a channel valve.

  • Working principle

    Connect a suitable caliber mass flow meter in parallel with a straight pipe to separate the measured flow. Connect the pressure differential composite sensor pressure pipe to the inlet and outlet of the mass flow meter, and install a full bore process ba

Technical Parameter FEATURES Download relevant materials

General-purpose technology parameters

  • Liquid phase flow rate :

    0.5~2000m ³/ H or special design

  • Flow error :

    ±0.5~1%

  • Moisture content range :

    0~100%

  • Moisture content error :

    ±2~5%

  • viscosity range :

    0-50000 mpa. s or special design

  • Explosion proof/protection level :

    ExdⅡB T6 Gb /IP66

  • medium temperature :

    Less than 130 ℃ or specially designed

  • ambient temperature :

    -40~85℃

  • Power supply :

    220V AC 50Hz/小于30W

  • Interface :

    Default RS485, Modbus RTU; Expandable wireless communication

●  Measurement of flow rate, density, viscosity, temperature, pressure, and moisture content;

●  Bidirectional metering;

●  Measurement of liquid flow rate containing bubbles;

●  Measurement of dirty fluids containing particles;

●  Wide flow measurement range, with a range ratio of 100:1;

●  Online viscosity measurement, which can adjust the heating power of the pipeline based on the fluid viscosity, adjust the amount of drag reducing agent used in fluid transportation, and save energy consumption and costs;

●  The mass flow meter does not require a front and rear straight pipe section, and the small caliber mass flow meter is connected continuously. Compared with large caliber mass flow meters of the same caliber, the volume is greatly reduced, and the transportation and installation costs are low.